Jessica Tile Floors June 12th, 2018 - 18:53:15
What`s the property owner`s risk tolerance? Does he/she want to be rock solid sure of the stability of the floor? Even if that means spending extra money and/or time to reinforce the floor. and accepting a floor that may sit higher than surrounding floors? Or is some risk of failure acceptable if the floor is not built to the righteous standards of the TCNA? Sometimes the extra effort is not worth the cost to the property owner. who should be fully informed on all options. Contractors who install flooring shouldn`t assume that clients don`t care enough to solve the problem: in the last year we`ve had two clients who spend thousands of extra dollars to reinforce subfloors in a kitchen and laundry room when we explained that their floors were too unstable for tile. They really wanted tile. and were willing to make the subfloor ready for it. even if it cost more.
The need for repair is rare. but it`s easy to have damaged tile replaced. Ceramic is strong. but it has been known to break when significant weight is accidentally dropped on it. Replacement is as simple as removing broken pieces. laying replacement tile. adding new grout to the area. and perhaps new sealant. Keep a few tiles around so that they match if needed. The occasional wipe or mop begins and ends the care-free maintenance of ceramic tile. The sealant that was applied during tile floor installation made it impervious to water and stain. Ceramic tile comes as close to requiring no upkeep as any flooring available. Of course. tile needs regular cleaning. Because it is impenetrable to water. tile patios and utility spaces can literally be hosed down. You only need standard off-the-shelf cleaning products.
What floor covering was on the floor before? If it had ceramic tile or stone. and the floor received reasonable traffic for years with no cracking or broken grout. it`s a pretty good bet that the subfloor is up to the job. If it was vinyl. carpet or hardwood. we are still in the dark.
Install the Ceramic Tiles. Start with the center and move outwards with each ceramic tile. Use thin set mortar or tile adhesive to set the tiles. make sure that the bond between the tile and the sub-floor sets by applying pressure on each tile. After the tiles have set. complete the process by applying the grout. Remember that the grout must be of the same color as the tiles you have chosen. Remember that each step requires twenty-four hours to set and dry before allowing yourself to proceed to the next step of your ceramic tile flooring installation.