Home / Tile Floors / removing ceramic floor tile from concrete slab / Img Removing Ceramic Floor Tile From Concrete Slab Surface Prep Contracting Solutions Getting Ready For New Flooring Lifting Tiles Best Way To Remove Wood Subfloor
Jessica Tile Floors June 11th, 2018 - 17:57:52
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
Install the Ceramic Tiles. Start with the center and move outwards with each ceramic tile. Use thin set mortar or tile adhesive to set the tiles. make sure that the bond between the tile and the sub-floor sets by applying pressure on each tile. After the tiles have set. complete the process by applying the grout. Remember that the grout must be of the same color as the tiles you have chosen. Remember that each step requires twenty-four hours to set and dry before allowing yourself to proceed to the next step of your ceramic tile flooring installation.
First. you have porcelain tiles. These tiles are made by firing at high temperatures. They are also very dense and moisture resistant. You can purchase porcelain in a variety of shades and colors. Porcelain tiles are the most expensive though but with them you have tile flooring ideas that can mimic stone and other materials.