Home / Tile Floors / laminate flooring that looks like ceramic tile / Gray Wood Tile Floor Homes That Looks Like Ceramic Flooring Planks Tiles Awesome Inspiring Style Look Porcelain Near Me Companies Hardwood Grain White Outdoor Laminate
Jessica Tile Floors June 11th, 2018 - 18:00:51
There are formulas used in the industry to determine if the subfloor has excessive `deflection` [bounciness. lack of rigidity]. The most cited one is the Tile Council of North America standard for deflection. which is stated as L/360 as a minimum. before tile underlayment is installed. L/360 means that the floor should not bend under weight more than the length (expressed in inches) of the unsupported span divided by 360. For example. if the span between supports runs for 20 feet then the deflection should not be more than 2/3" between the center and the end. L=20 x 12" = 240". L/360 = 240"/360 or 2/3". So 2/3" is the maximum amount of movement the center of the span should be allowed to move.
You also have ceramic tiles. This kind of tile is the inexpensive way to achieve the look of granite or marble floors. They can give the effect of having water on your floors that`s oh so dramatic. Another kind of tile you can use as flooring is metal tile. These are either industrial gratings or stainless steel. If you want your floor to have the look of brass. bronze or steel. this is the one to go for. You can mix and match this tile with other kinds of tiles to accent the floor and create a point of interest in the room.
Does the floor feel bouncy? If so. it is. Trust your instincts. It`s not ready for tile. A well built subfloor feels very stiff underfoot. Squeaking can also be a bad sign. but it may also solvable by screwing down the planks or plywood better into the joists.
For plywood subfloors. be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise. your ceramic tiles will dislodge easily. or worse. break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it. it must be cleaned thoroughly. For dust and other debris. sweep and then mop your concrete subfloor surface. and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.