Jessica Tile Floors June 11th, 2018 - 17:53:48
The need for repair is rare. but it`s easy to have damaged tile replaced. Ceramic is strong. but it has been known to break when significant weight is accidentally dropped on it. Replacement is as simple as removing broken pieces. laying replacement tile. adding new grout to the area. and perhaps new sealant. Keep a few tiles around so that they match if needed. The occasional wipe or mop begins and ends the care-free maintenance of ceramic tile. The sealant that was applied during tile floor installation made it impervious to water and stain. Ceramic tile comes as close to requiring no upkeep as any flooring available. Of course. tile needs regular cleaning. Because it is impenetrable to water. tile patios and utility spaces can literally be hosed down. You only need standard off-the-shelf cleaning products.
Knowing the kind of subfloor you`ll be installing ceramic tile flooring over is important. There are three main types of subfloors you might encounter: Vinyl. plywood. and concrete floors. Installing ceramic tile flooring directly to your vinyl or linoleum subfloor surfaces is greatly discouraged. One. it may contain asbestos fibers; and two. vinyl flooring is not a solid as good ol` concrete flooring. When installing ceramic tile on vinyl. experts would recommend rough-sanding. or scarifying. the vinyl floor surface first so your tiling mortar has good grip to set on.
For plywood subfloors. be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise. your ceramic tiles will dislodge easily. or worse. break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it. it must be cleaned thoroughly. For dust and other debris. sweep and then mop your concrete subfloor surface. and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.